Wear-resistant ceramic adhesive is also called wear-resistant ceramic AB adhesive. The main component is a combination of epoxy resin and polysulfide rubber. Wear-resistant ceramic adhesive is a high-performance adhesive specially used to paste wear-resistant ceramic pieces onto the inner wall surface of equipment or pipeline, so that equipment or pipeline can be protected by wear-resistant ceramic pieces. Wear-resistant ceramic adhesive is divided into organic adhesive and inorganic adhesive.

The use of wear-resistant ceramic adhesive is as follows :

• First of all, the equipment parts that need to be pasted on the wear-resistant ceramics should be polished or sandblasted to remove the corrosion, dust, oil stains and stains on the surface. If the oil stains are difficult to remove, they should be cleaned with cleaning agent to ensure that the surface treatment is clean.
• Then select the appropriate wear-resistant ceramic sheet to keep the surface clean and tidy ;
• Apply the adjusted wear-resistant ceramic adhesive evenly to the wear-resistant ceramic sheet aThe AB component of the wear-resistant ceramic adhesive was adjusted in proportion for standby ;
• nd equipment or the inner wall of the pipeline ;

        After the wear-resistant ceramic is attached to the bonding part, it can be fixed after waiting for 24 hours, and can be tightly bonded ; Wear-resistant ceramic AB glue needs to pay attention to when it is used. It is not appropriate to adjust too much wear-resistant ceramic adhesive each time. One reason is that too much is not easy to adjust evenly, and the other is that too much is too late to use, which will solidify and cause waste. Therefore, the amount of adhesive should be adjusted according to the actual needs.